Compactor
Receiver
Roll-Offs
Receiver boxes built to mate with stationary compactors at industrial sites, distribution centers and high-volume commercial accounts. The octagon body and narrow nose pack more into every haul.
- Body design
- Octagon
- Floor & cover
- 10 GA
- Built in Arizona
- PHX
Narrow nose
Promotes maximum compaction density
10 gauge steel cover
Octagon body design
Locking hooks
Keep doors locked during loading
Heavy-duty hinges
Zerk fittings carry the door weight
Ground rollers
Heavy-duty 8″ × 8″ front and rear
Hover the points to explore
01 / 05Tap the points
Narrow nose
Promotes maximum compaction density
01
Compactor opening
Front opening mates with your stationary compactor.
02
Single rear door
Heavy-duty hinges with Zerk fittings carry the door weight. Locking hooks keep it shut during loading.
03
Reinforced body
Octagon body with a 10 gauge steel cover, built for high-volume waste.
20, 30 & 40 Yd Compactor Receiver
- Sizes
- 20, 30 and 40 Yard · Cable Lift or Hook Hoist
- Floor
- 10 Gauge Floor Reinforced by 3″ Channels on 18″ Centers
- Side walls
- 10 Gauge Side Walls Reinforced
- Cover
- 10 Gauge Steel Cover
- Guide rails
- Designed for Standard Roll-Off Hoist Utilizing Two Longitudinal Guide Rails (6″ x 2″ x 3/16″ Tubing)
- Rail width
- 36½″ or 37½″
- Rear door
- Heavy-Duty Hinges with Zerk Fittings Designed to Carry Door Weight
- Locking
- Heavy-Duty Locking Hooks for Keeping Doors Locked During Loading
- Corners
- Reinforced Corners
- Rollers
- Heavy-Duty 8″ x 6″ Front and 8″ x 8″ Rear Ground Rollers · Nose Cone Rollers with Zerk Fittings
- Finish
- Exterior Painted Your Choice of Color (Some Colors May Be Extra) · Interior Primed
- Options
- Welded Solid Inside and Out7 GA All Around7 GA, ¼″ FloorReinforced Side Ribs (1–3)Bottom Rail ¼″Sealed Back Door (All the Way Around)Wear Strips 2 × ½ or 2 × ¼
Octagon design
This Compactor Receiver box has an octagon design with a “narrow nose,” which promotes maximum compaction density and payload from your compactor. You can haul more trash with fewer trips. Perfect for use with stationary waste compactors, these packer/receiver boxes are often specified for the demanding requirements of high volume waste applications such as industrial sites.
Made in our
Phoenix shop.
Every receiver box is cut, formed, welded and painted by the Hambicki crew, then loaded and shipped from the same yard.
01
Cut & form
Steel plate is cut and formed to the size and profile you order.
02
Weld
Floor, cover, rails and doors are welded by our shop crew.
03
Paint
Surface prep and finish in your fleet color.
04
Inspect & ship
Checked, loaded and freighted to your yard.
On the floor in Phoenix
Watch
See a receiver box come together
From flat steel to a painted, compactor-ready box: floor, cover, rails and rear door built on our shop floor.
More videosCompare other roll-offs
Ready to build your next dumpster?
Designed. Built. Delivered. On time. Every time.