Commercial Containers
Front LoadDumpsters
Commercial front load containers built for daily route service, from 2 to 8 yards. 12 gauge construction, gusseted fork pockets and lid ears sized for standard plastic lids.
- Sizes
- 5
- Cubic yards
- 2–8
- Built in Arizona
- PHX
3/16" lid ears
Sized to accommodate standard plastic lids
Interlocking banding
12 gauge banding on the top rails
Gusseted fork pockets
10 gauge 4" × 8", 3/16 triangle and taco gussets
Flanged corners
12 gauge construction throughout
V groove ridges
Vertical ridges on front and back for stiffness
01 / 05Tap the points
3/16" lid ears
Sized to accommodate standard plastic lids
Front Load sizes
New design
New from Hambicki
Fork lift pockets
designed to stack.
Our new front load design reworks the fork lift pockets for more stackable capability. Containers nest inside one another for shipping, so almost twice as many fit on a truckload compared to standard dimensions.
- Standard
- 1×
- New design
- Nearly 2×
Units per full truckload. Exact counts confirmed on your quote.
Dimensions
4 Yard Front Load
- Capacity
- 4 cubic yards
- Front height (A)
- 46"
- Back height (B)
- 57"
- Length (C)
- 48"
- Width (D)
- 68"
- Fork pockets (standard)
- 4x8x36″
Width is 68" on every size. Casters add 8" to height.
Units per full truckload
| Size | Standard | SpecialHigh fork pockets |
|---|---|---|
| 2 YD | 53 | 96 |
| 3 YD | 53 | 85 |
| 4 YD | 30 | 58 |
| 6 YD | 14 | 30 |
| 8 YD | 8 | 30 |
The special design's high fork pockets let more units stack per load. Mixed-size loads vary; we confirm counts on your quote.
Standard specifications
How we build them
Standard construction
- Front, Back, Sides & Bottom Constructed Out of 12 Gauge Steel
- Vertical V Groove Ridges on Front and Back
- V-Hit Bumper in front for Pocket
- Sides with Reinforced Flanged Corners
- 2X3 Interlocking Banding Top Rail
- 10 Gauge 4″x8″ Fork Pockets with Gussets Welded Solid
- Guide Gusset (1) on the Bottom and (1) on the Top of Pocket
- Welded Solid Inside for Maximum Durability
- (2) Rails Keep Container Bottom Off the Ground
- Plastic Lids
- Interior and Bottom Coated with Primer
- Exterior Painted Your Choice of Color (Some Colors May Be Extra)
Options
- Quick Release Caster Pads, Support Pads, and Casters
- Manual Locking Lid Bar
- Automatic (Gravity) Locking Lid Bar
- 10 Gauge Floor
- Metal Lids
- 8 Yd ONLY – (3) Rails to Keep the Container Bottom off the Ground
Flat-top containers
Flat-top front load
A front load with a flat top and high fork pockets, in 6 and 8 yard sizes. A 6 yard construction version is also available.
Flat-top front load
6 & 8 Yd Flat-Top Container
6 & 8 Yd Flat-Top Container construction
- Front, Back, Sides & Bottom Constructed Out of 12 Gauge Steel
- One side with sliding door included, Two sliding doors at additional cost
- Vertical V Groove Ridges on Front and Back
- Sides with Reinforced Flanged Corners
- Interlocking Banding on Top
- 10 Gauge 4″x8″x40″ Gusseted Fork Pockets
- Gussets on Fork Pockets are welded solid with two front bumpers
- Welded Solid Inside for Maximum Durability
- Duraflex Plastic Lids
- (2) Rails Keep Container Bottom Off the Ground
- Interior and Bottom Coated with Primer
Options
- 10 Ga. Floor
- Metal Lids
- Manual Locking Lid Bar
- Automatic (Gravity) Locking Lid Bar
- 8 Yd ONLY – (3) Rails to keep Container Bottom off the Ground
Options
Optional Accessories
5%Off
Truckload pricing
5% off a full truckload of front loads
- 2 YD
- 3 YD
- 4 YD
- 6 YD
- Stackable
- Mixed 4 & 6 yard
on the load shown - 38
- 2 yard front loads
per truckload - 72*
*Estimate. Counts vary by size mix; we confirm yours on the quote.
How it's builtMade in our
Made in our
Phoenix shop.
Every front load container is cut, formed, welded and painted by the Hambicki crew, then loaded and shipped from the same yard.
01
Cut & form
Steel plate is cut and formed to the size and profile you order.
02
Weld
Floors, walls, rails and doors are welded by our shop crew.
03
Paint
Surface prep and finish in your fleet color.
04
Inspect & ship
Checked, loaded and freighted to your yard.
On the floor in Phoenix
Watch
See a front load come together
From flat steel to a painted, route-ready front load: walls, pockets, banding and lid ears built on our shop floor.
More videosMore containers
All dumpsters →Other dumpsters we build
Tub-Type Roll-Off
10 to 40 yards
Rectangular Roll-Off
Straight-wall, max cube
Tilt Hoppers
Forklift-dump, shop floor
Scrap Containers
Heavy-gauge, for metal yards
Ready to build your next dumpster?
Designed. Built. Delivered. On time. Every time.